How to Turn Off WiFi on a Router – Basic Guide

When you are not using the router, turn off the Wi-Fi to guarantee that it remains secure for a long duration of time. Consequently, if you do not often access the internet, it is preferable to leave the WiFi switched off. Most WiFi modems now come with an exterior switch to make it easier for you to access the internet.

Some, on the other hand, may not have it. It is at this point that you must bring the technically aware individual outdoors! Of course, just turning off the switch is a simple solution, but if your router does not have this feature, you will need to step up your game. You must first get access to the router’s administrative interface in order to do so.

Using this article, you will learn how to turn down WiFi on various routers in order to maintain their integrity and security. So, let’s get this party started!


Turning Wi-Fi off on the Modem ROUTER: Some Basics

First and foremost, we need to understand the router’s internals and externals before we can figure out how to turn wifi off on the router.

A typical local broadband router consists of three components, which are as follows:

1. A NAT router is a device that directs an internet connection to a single specific IP address on the local network. Additionally, this device shares it with a local network that is managed by it.

2. It is referred to as a Network Switch since it supports a number of devices in connecting to a local network provided by the router via an Ethernet connection.

3. A Wireless Access Point (WAP) is a device that allows several devices to connect to the router’s local network via wireless connections.

Read Also: How To Stream Video From PC To Android

According on the kind and interface of your router, you should be able to operate each of the parts listed above individually in most cases. To make it easier to manage your network security, you may easily switch off the wireless access point whenever you choose.

Furthermore, you have the option of turning off the router and using the device as a network bridge, both with and without an Ethernet cable, to connect to another network. To put it another way, there isn’t a single method for turning off Wi-Fi on a router. Because router manufacturers use a variety of layouts and interfaces in their products, there are other areas where each Wi-Fi may be found.


How to Turn Off Wi-Fi on Different Routers

It is possible to log into most Wi-Fi routers, which will transport you to the main page of that router’s website when you do. However, this method does not work for everyone. You might attempt an easier method of turning off the Wi-Fi on the router.

Read Also: MiFi Vs Wifi

As a result, you must go to the router’s website in order to use this approach. After that, you’ll see a button or toggle to turn off the WiFi, and you’ll be ready to go. The only thing you need to do is log into the router, and everything else will fall into place on its own. For those who find that this approach does not work for them, here is a simple method for turning off Wi-Fi on different routers.


Turning Off Wi-Fi on Airport Extreme or Apple Airport Time Capsule

These are the steps you do in order to switch off Wi-Fi on your Apple Extreme:

  1. Disable Wi-Fi by selecting Airport Utility from the menu bar.
  2. Navigate to Applications > Utilities > AirPort Utility to complete the process.
  3. Select Edit from the drop-down menu next to your base station.
  4. If your base station’s administrative password is requested by the screen, type it into the text box provided.
  5. After that, select Wireless from the drop-down menu.
  6. A pop-up menu with the option to use Network Mode will appear.
  7. Select Off from the drop-down menu.
  8. Finally, press the Update button, and the updated settings will be applied to the router when it resumes after it has been powered down.

Turning off Wi-Fi on Belkin Router

You must follow these steps carefully in order to disable Wi-Fi on your Belkin router:

Read Also: How To Check Browser History On Wifi Router

  1. To begin, launch a web browser on your computer’s desktop.
  2. Click on the address field that is located at the top of your desktop screen to continue.
  3. Now, type http://router or 192.168.2.1 (the default IP address of the router) into the address bar and hit Enter to continue. It is essential to ensure that this device is linked to the WiFi network of your Belkin router at all times.
  4. After that, click on the Login button, which is located in the upper right corner of your desktop screen.
  5. There, click on the Password area and enter the password for your router into the box.
  6. To submit your form, click on the Submit button. If you are using an unconfigured router, do not input the password; instead, click on Submit.
  7. Now, select Channel and SSID from the drop-down menu. If you are using a Belkin Wireless-G router, go to the Wireless menu and select Disable from the list.
  8. Locate the Wireless Mode selection. Once you’ve located it, click the Off button on the dropdown menu icon. When using a Belkin Wireless-G router, navigate to the Channel and SSID menu item and select Wireless Mode from the drop-down menu. Then, select Off from the dropdown option that appears.
  9. Finally, select the Apply Changes option.

Turning Off Wi-Fi on Motorola Router

The following steps will show you how to switch off Wi-Fi on your Motorola router:

  1. To begin, launch the web browser on your computer.
  2. Then, at the top of your desktop screen, locate the address area and type in your desired URL.
  3. After that, enter http://192.168.0.1 into the address bar and press the Enter key. If the default LAN IP address of your router has changed in the past, you can provide a custom address for it.
  4. Now, enter admin as the username and Motorola as the password in the appropriate fields.
  5. Then, after clicking on Login, a Status page will appear on your computer screen.
  6. The next step is to select Wireless from the drop-down menu that appears at the top of your desktop window.
  7. Following that, a Wireless Setup page will be presented.
  8. Now, open the dropdown menu and choose Disabled from the list.
  9. Finally, click on the Apply button.
    In the case of Motorola routers, the changed settings take effect immediately, without the need to restart your router.

Turning Off Wi-Fi on TP-Link Router

If you have a TP-Link router, you may disable Wi-Fi on it by following these steps:

  1. Begin by launching a web browser on your computer.
  2. Then, at the top of your desktop screen, select the address choice from the drop-down menu.
  3. Enter the IP address of your router, which is 192.168.1.1, and press the Enter key. The Login screen will appear after that.
  4. Now, to sign in, enter your username and password in the appropriate boxes on the screen. If you haven’t yet setup your router, you can put admin in both of the corresponding boxes.
  5. Then navigate to the Basic tab and choose the Wireless radio button.
  6. Locate the Enable Wireless Radio option and uncheck both of the frequency bands selections, 4GHz and 5GHz, to make room for the new wireless radio.
  7. Finally, click on the Save button.

Turning Off Wi-Fi on D-Link Router

You may disable Wi-Fi on D-Link routers by following the instructions outlined below:

  1. First and foremost, open a web browser on your computer’s desktop.
  2. Then, at the very top of your desktop screen, locate the address area and click on it.
  3. After that, type in the default IP address of your router (192.168.0.1), followed by the Enter key.
  4. Then, if prompted, enter admin as the username and your password if prompted. The default password for D-Link routers is a blank string of letters and numbers.
  5. Then, at the top of your desktop screen, select Setup from the drop-down menu that appears.
  6. Then, on the left-hand side of your desktop screen, click on Wireless Settings to make changes.
  7. Locate the Manual Wireless Network Setup button, which is located towards the bottom of the screen, and press it.
  8. Now, locate the Enable Wireless Option checkbox and uncheck it.
  9. Last but not least, click Save Settings.
    When using a dual-band router, you must repeat the procedures above in order to disable both frequency bands simultaneously.

Turning off Wi-Fi on Netgear Router

It is possible to turn off Wi-Fi on your Netgear Router using the following method:

  1. To begin, open a web browser on your computer and surf the internet.
  2. Then, at the top of your desktop screen, select the address choice from the drop-down menu.
  3. Then, in the address bar, type http://www.routerlogin.net and press Enter.
  4. To log in, you’ll need to provide the admin username and password for your router. Fill in the blanks using your username “admin” and the password “password,” which is the default value.
  5. Go to the Advanced tab and select Advanced Setup from the drop-down menu.
  6. Now, choose Wireless Settings from the drop-down menu and select Enable Wireless Router Radio from the list.
  7. 2.4GHz and 5GHz are both unchecked in the frequency band drop-down menu.
  8. Finally, click on the Apply button.

Turning off Wi-Fi on ASUS Router

If you have an ASUS router, you can disable Wi-Fi by following the instructions outlined below:

  1. To begin, launch any web browser that is currently installed on your computer.
  2. Then, at the top of your desktop screen, select the address choice from the drop-down menu.
  3. Next, enter the IP address of your router, which is 192.168.1.1, and press the Enter key.
  4. Then you’ll need to log into the router’s setup page.
  5. Locate Advanced Settings and select Wireless from the drop-down menu.
  6. After that, select the Professional option.
  7. Navigate to the Frequency drop-down menu and choose 5GHz. Then locate the Enable Radio option and select No from the drop-down menu.
  8. Last but not least, click on “Apply” to turn off the Wi-Fi.

Turning Off Wi-Fi on Linksys Router

There are two methods for turning off Wi-Fi on your Linksys router. In the event that your router is already linked to the local network, proceed as follows:

  1. You must first open a web browser on your device, which might be any.
  2. In the next step, select the “address” option located at the top of your desktop screen.
  3. Now, in the address bar, put 192.168.1.1 or myrouter.local and press Enter.
  4. Final step will be to decide whether you want to log in directly to your modem router or use your Linksys Cloud account instead.
  5. Directly: By taking this option, you will be required to enter your password under the Access Router section. The password is set to admin by default.
  6. Account in the Linksys Cloud: This method will need you to click on “To log in with your Linksys Smart Wi-Fi account, click here” in order to proceed. After selecting this option, you will be prompted to enter your account’s email address and password.
  7. Now, locate Smart Wi-Fi Tools and select Wireless from the drop-down menu.
  8. It is necessary to locate the Network that is present next to the network name in the next phase.
  9. To turn off the network, select Off from the drop-down menu. Repeat the process until all networks have been disabled.
  10. Finally, click on the Apply button.

Using remote access, you may disable Wi-Fi on your Linksys modem router. To do so, follow the instructions below:

  1. To begin, do the same thing as before – open your web browser.
  2. Afterwards, choose the address choice that appears at the top of your desktop computer’s display screen.
  3. Now, put linksyssmartwifi.com into the address bar and press Enter.
  4. Please enter your correct log-in email address and password.
  5. Then locate Smart Wi-Fi Tools and select Wireless from the drop-down menu.
  6. Find the Network present next to the network name and click on it.
  7. Then, choose Off and continue the process until all of the accessible networks have been turned off.
  8. Finally, click on the Apply button.


YouTube video


Final Words

Hopefully, this guide has provided you with an understanding of the numerous methods for turning off Wi-Fi on your modem router. So, whether you’re doing it to guarantee the security of your router or for any other reason, turning down your Wi-Fi is a smart idea whenever you’re not using it.

So, no matter what brand or model of router you have, simply follow the above-mentioned steps to swiftly switch off Wi-Fi access on it.


Was this post helpful?

author techswifty
John Stewart

Hi There. I am the creator of this website. I have done Bachelor Of Science in Information and Technology from Drexel University. By Profession, I am working for a reputable company as a Network Support and Cyber Security Engineer.
In my free time, I love to explore new technologies, products, and services. Here, my aim is to bring top quality content to my website visitors. I will be posting tech reviews, tips, and much more.
I hope you will enjoy your stay here. It's my pleasure to have you here.

Articles: 84

Leave a Reply

Your email address will not be published. Required fields are marked *